Trick Flow GenX 235 Cylinder Heads for GM LSX (standard bolt pattern) TFS-3061T001-C03

Product Code: TFS-3061T001-C03
Availability: Contact to Confirm Availability
$1,299.00

These Trick Flow GenX® 235 cathedral port cylinder heads for GM LSX engines are fully CNC-machined to significantly increase the performance of extreme performance LS-powered vehicles. Trick Flow engineers altered the valve angles from 15° to 13.5° to decrease valve shrouding, increase mid-lift airflow, and improve rocker arm-to-valve cover clearance. Material was added at the rocker arm mounting points to increase high-rpm valvetrain stability. The spark plugs were relocated in the CNC-profiled combustion chambers to enhance mid-lift airflow and increase the rigidity of the casting for extreme horsepower applications. Top-of-the-line CNC Competition Ported runners have a premium high resolution surface finish for maximum flow and performance.

Trick Flow GenX 235 cylinder heads are emissions-legal under CARB E.O. #D-747 for 1997-present GM vehicles with 4.8L, 5.3L, 5.7L, and 6.0L engines.


Combustion Chamber Volume (cc):
70
Intake Runner Volume (cc):
235cc
Exhaust Runner Volume (cc):
80cc
Cylinder Head Style:
Assembled
Cylinder Head Material:
Aluminum
Intake Port Shape:
Cathedral
Intake Valve Diameter (in):
2.080 in.
Cylinder Head Finish:
Natural
CNC-Machined Combustion Chamber:
Yes
CNC-Machined Intake Runner:
Yes
CNC-Machined Exhaust Runner:
Yes
Combustion Chamber Style:
Heart
Intake Port Location:
Standard
Exhaust Port Shape:
Oval
Exhaust Port Location:
Standard
Spark Plug Style:
Angle
Intake Valves Included:
Yes
Exhaust Valves Included:
Yes
Exhaust Valve Diameter (in):
1.600 in.
Valve Springs Included:
Yes
Maximum Valve Lift (in):
0.600 in.
Outside Diameter of Outer Spring (in):
1.300 in.
Damper Spring Included:
No
Number of Springs Per Valve:
Dual
Retainers Included:
Yes
Retainer Material:
Titanium
Locks Included:
Yes
Lock Style:
7 degree
Valve Stem Seals Included:
Yes
Rocker Arm Studs Included:
No
Rocker Arms Included:
No
Rocker Arm Nuts Included:
No
Guideplates Included:
No
Valve Cover Mounting Style:
Centerbolt
Accessory Bolt Holes Drilled:
Yes
Intake Valve Angle:
13.50
Exhaust Valve Angle:
13.50
Valve Guides Included:
Yes
Valve Guide Material:
Bronze
Valve Seats Machined:
Yes
Valve Seat Machine Style:
3-angle
Valve Seat Material:
Ductile iron
Steam Holes Drilled:
No
Oiling Style:
Through pushrod
Machined for O-Ring:
No
Heat Crossover:
No
Quantity:
Sold individually.  ($2,598 for the set) 
Notes:
These cylinder heads can only be used on LS-based engines with a minimum bore diameter of 4.125 in. Must be used with roller rocker arms.
 
CARB EO Number:
D-747 (pdf)
To see a list of qualifying vehicles, enter CARB EO Number D-747
Emissions:
California EO Approved

Write a review

Note: HTML is not translated!
    Bad           Good
Captcha